IEC 60529 IPX1/2/3/4/5/6 Comprehensive Water Ingress Testing Chamber 1000L Waterproof Test

IEC 60529 IPX1/2/3/4/5/6 Comprehensive Water Ingress Testing Chamber 1000L Waterproof Test

Equipment Overview

Application Background: The destruction of products and materials by natural water (rain, sea, river, etc.) causes an incalculable economic loss every year. The damages caused mainly include corrosion, fading, deformation, strength drop, expansion, mildew, etc., especially electrical products are easily broken into fires due to short circuits caused by rain. Therefore, enclosure protection water testing for specific products or materials is an essential and critical process.

General application areas: outdoor lighting, household appliances, auto parts and other electronic and electrical products.

Equipment function: The main function of the equipment is to test the physical and other related properties of electronic and electrical products, lamps, electric cabinets, electrical components, automobiles, motorcycles and their parts and components under simulated climatic conditions. After the test, judge whether the performance of the product meets the requirements by the verification, so as to facilitate the design, improvement, verification and factory inspection of the product.

Standard: IEC60529:1989 +A1:1999 +A2:2013 <Degrees of protection provided by enclosures (IP Code)> IPX1, IPX2, IPX3, IPX4, IPX5, IPX6 test, figures 4 and figure 6.

Equipment Features

1.Suitable for product IPX1, IPX2, IPX3, IPX4, IPX5, IPX6 waterproof rating test.

2. The outer casing is made of domestic high-quality steel plate, and the surface is painted with baking varnish, which is beautiful and durable.

3.The inner chamber and turntable are all made of SUS304# stainless steel plate to ensure long-term use without rust.

4. There is a transparent observation window on the door, and LED lighting inside of the chamber, easy for operator to observe the internal test.

5. IPX34: Configured R200mm and R400mm oscillating tubes according to the specifications of IEC60529 figure 4 (as shown below)

6. IPX56: Configured a spray nozzle according to the specifications of IEC60529 figure 6 (as shown below):

7. Turntable drive: use high-quality stepper motor, can automatically control the positive and negative rotation (forward and reverse: suitable for the sample power-on test and to prevent cable winding).

8. The test time can be set on the touch screen. The setting range is 0-999min (adjustable).

9. The core control system adopts 7-inch touch screen + PLC. The electrical components adopt imported brands such as Omron. The wiring process conforms to the requirements of national standards. The layout of the electric board is reasonable, the wiring is firm and the marking is clear.

10. There is configured with a waterproof socket inside the chamber for power on the sample.

11. With safety protections of leakage protection, water shortage protection, short circuit protection.

Technical Parameters:

Technical Parameters	Basic Parameters
	Inner Chamber Size	L1000*W1000*H1000mm
	Outer Chamber Size	L1480*W3800*H1800mm
	Turntable Diameter	￠400mm
	Turntable Maximum Load Bearing	10KG
	Turntable Speed	1-5r/min (adjustable)
	Turntable Rotation Method	Always positive / positive and negative alternate
	Flow Adjustment Method	Manually adjust flow by adjusting flow meter on the panel
	Test Time	0-999 min
	Power supply for sample	Configured with a waterproof socket inside the chamber for client to power on sample during test
	Equipment dimensions	Approx.2770mm(L)*1330mm(W)*1750mm(H)
	Total Weight	Approx. 350kg
	Required site place	3.2m(L)*2m(W)*2m(H)
	IPX12 Dripping Testing Parameters
	Drip area	600*600mm
	IPX12 nozzle size	Diameter 0.4mm
	Distance between drip holes	20*20 mm
	Water flow	IPX1=1mm/min; IPX2=3mm/min
	Drip board lifting method	Not lifting (fixed)
	IPX34 Oscillating Tubes Parameters
	Oscillation Tube	R200 mm and R400mm
	Distance between Nozzle Sample	Within 200mm
	Spray Aperture Spacing	50 mm
	Oscillating Tube Swing Angle	±60° (IPX3), approximately ±160°(IPX4) (Note: standard requires IPX3:120°; IPX4: almost 360°, but due to there is turntable under oscillating tube during test, so 360° can not achieved during actual testing, if without turntable, then 360° can be achieved)
	Angle Between Two Holes	120°(IP3) 180°(IP4)
	Needle Hole	φ0 .4 mm
	Oscillating Speed	IPX3: 15times/min; IPX4: 5times/min
	Water Flow of Each Hole	0.07 L/min +5%
	Spray Pressure	80-150Kpa
	IPX34 Spray Nozzle Parameters
	Parameters of Spray Nozzle	Outer diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole at the center, 2 inner circles of 12 holes at 30° pitch,4 outer circles of 24 holes at 15° pitch, total 121 holes of Ф0.5mm, made of brass.
	Water Flow	10L/min±5% adjustable by flow meter (flow meter is not included in this item, should be prepared by user)
	Pressure	50～150Kpa, the pressure gauge measuring range: 0～0.25Mpa
	Moving Shield	Made of aluminum, can be detachable Note: the aluminum moving shield is easy to deform, pay attention during use
	IPX56 Jet Nozzle Parameters
	IPX5 Nozzle Jet Aperture	6.3mm
	IPX6 Nozzle Jet Aperture	12.5mm
	IPX5Jet Flow	12.5±0.625
	IPX6 Jet Flow	100±5L/min
	Water Pressure (Mpa)	Adjusted according to the specified water flow
	Jet Distance	2.5M (nozzle away from the center of the turntable)
	Nozzle Fixed Method	Mechanical fixing
	Electrical Parameters
	Power Supply for Equipment	380V, 50Hz
	Equipment Power	3.0KW
	Safety Protection Function	Leakage protection, water shortage protection, short circuit protection
Conditions of Use	The following conditions are guaranteed by the user and the corresponding connection is completed.
Use of Space	The ground is level, the drainage is smooth, floor and wall are waterproofing, Ground bearing capacity is not less than 200kg/㎡ Well ventilated No strong vibration around the device No strong electromagnetic field around the device No flammable, explosive, corrosive substances and dust around the equipment Appropriate use and maintenance space is left around the equipment: Rear side, left and right side, top of the equipment: 800mm; front side of equipment: 1400mm
Environmental Conditions	Temperature:5℃～35℃ Relative humidity: ≤85% Air pressure:86kPa～106kPa
Power Supply Conditions
Voltage, Frequency	AC380V±10%; 50Hz±10%; three-phase four-wire + protective ground wire
Power	3.0kW
Protective Grounding Resistance	Grounding resistance of protective grounding wire is less than 4Ω
Power Switch	1. The user is required to configure the leakage protection air switch of the corresponding capacity for the equipment at the installation site, and the switch must be used independently for the device. 2. It is forbidden to use the knife switch or power socket. 3. The leakage protection air switch is not more than 2 meters away from the equipment.
Water Source	1. The user is required to configure the water source for the equipment at the installation site, the water pressure is not less than 0.2Mpa, and the 4-point faucet is installed. 2. The position of the faucet is no more than 2 meters away from the equipment.